Wheels per package:
The amount of wheels in a package. A scooter needs two wheels, one for the front and one in the back. When your wheels are close to being worn down it might be an idea to consider buying some new ones, before it is too late.
Bearings:
Each wheel needs 2 pieces of bearings, which have to be pressed into the wheel if not already included. The quality of bearings is divided with ABEC. The higher the value, the better the bearings will run. For an example an ABEC-7 is better than an ABEC-5.
Wheel diameter:
The size of the wheels should depend on the way you ride. If your focus is a great experience, a sweet flow and nice speeds, then you need to go for larger wheels. If instead, you want fast reactions and improved control, then you will need to go for smaller wheels. It is important the wheel diameter fits along with the fork, deck and brake.
Weight:
The total weight of the wheels once assembled. Lighter wheels is a good idea if you want to do tricks with your scooter, however the durability lessens on lighter wheels compared to the heavier ones. Heavy wheels will therefore last longer, but the execution of the tricks will also be harder.
Wheel width:
The wheel width of your scooter impacts its grip and stability. Wider wheels offer greater stability and grip, ideal for ramps and park riding, while narrower wheels reduce friction and are preferred for technical street tricks. Always ensure the wheel width is compatible with your scooter's fork and deck.
Dirt scooters and scooters with bigger wheels typically have significantly wider wheels. These wider wheels provide enhanced traction, making them ideal for off-road surfaces or uneven terrain.
Core material:
Wheels of aluminum and nylon both has their advantages when it comes to quality. Wheels of aluminum are the strongest, but nylon wheels are the lightest. It is therefore smart to go efter nylon wheels if you wanna perform tricks on your scooter. If you on the other hand is using your scooter as a transport then aluminum wheels is the choice for you.
Core design:
There is various types of core designs: Solid and spoked. Solid core wheels are relatively heavy wheels, but at the same time more durable. Spoked wheels are lighter, but have slightly less durability.
Rubber material:
Polyurethane is a strong material that can handle more weight than plastic or metal. This also means it is more resistant to damage than other wheel materials. They also provide better shock absorption and are quieter, making them ideal for carpeted floors.
Wheel hardness:
A wheel's hardness is measured on the durometer scale, which goes from 0 - 100 A. 0 is the absolute softest while 100 A is the hardest. Hard wheels lasts longer and rides faster. Soft wheels wear down quicker, but has a much better grip and are perfect for parks and indoors usage.
Wheel profile:
A flat profile gives the best grip, where as the most narrow profile provides more speed for the wheels. The fork's look needs to match the wheel profile.
Wheel hub width:
The vast majority of scooter wheels have a hub width of 24 mm, which fits forks and decks with also 24 mm hub width.
Axle diameter:
Describes the diameter of the axle / bolt that will hold the wheel. The wheel in the ball bearings is intended for a specific diameter of the shaft / bolt.
Always climate compensated shipping
